Noticed cracks, rough spots, or faded plaster in your pool? Resurfacing takes care of those issues and keeps your pool safe and enjoyable.
We restore your pool’s finish, stop leaks, and extend its life with professional resurfacing and replastering in Haymarket, VA. Our team’s experience helps you avoid costly mistakes and keeps your backyard looking sharp.
We’ll walk you through surface material options, project timelines, and what you need to do for maintenance. You’ll know what to expect and how to protect your investment with us.
When you work with Dolphin Pool Services, you get reliable results, clear communication, and a smooth project from start to finish.
We focus on clear signs your pool needs help, the real benefits of professional replastering, and the step-by-step resurfacing work we do. These points help Haymarket pool owners decide when it’s time to act—and why to trust Dolphin Pool Services.
Check for rough spots, white or gray etching, and flaking plaster. These usually mean water chemistry or age has worn the plaster down.
Small cracks and frequent staining also show the finish is failing. Water loss and pitting near steps or lights often point to plaster or shell problems.
If brushing or acid washing only helps for a little while, it’s probably time for resurfacing. We recommend a pro inspection if you notice these issues.
Our technicians check plaster thickness, look for leaks, and assess any rebar or shell damage before we recommend resurfacing or full replastering.
Professional replastering gives your pool a tough, long-lasting interior—often 10–20 years with good care. We use quality plaster mixes and follow proper curing steps to prevent early wear.
Our licensed crew avoids common DIY mistakes like bad bonding or uneven finishes. We remove rough, abrasive surfaces and fix any structural issues we uncover.
When you hire Dolphin Pool Services, you get better warranty coverage and improved resale value. We document our work, fix underlying problems, and advise you on water chemistry to protect your new surface.
We start by draining the pool and cleaning the surface. Then we repair cracks, chips, and any exposed corrosion, prepping the surface with a bonding coat or primer.
You can choose from aggregate finishes, quartz, fiberglass liners, or special coatings. We help you pick the best option for your budget and your goals.
Our team applies the new surface to the right thickness and lets it cure fully. After curing, we refill and balance the water chemistry.
We guide you on maintenance steps so your new surface lasts. With Dolphin Pool Services, you get licensed technicians, quality materials, and clear documentation all the way through.
We help you find materials that fit Haymarket’s climate, your budget, and your maintenance style. Pick finishes that handle hard water, UV, and freeze-thaw cycles, and set up a care routine to keep your new surface in great shape.
Traditional white plaster feels smooth and costs less, but in Northern Virginia it needs more frequent attention because it stains and lasts about 7–10 years.
Pebble and exposed-aggregate mixes, like natural pebbles or quartz blends, resist stains better and look more natural. They usually last 12–20 years and handle seasonal changes well.
Glass bead and high-quality quartz finishes give a glossy look and stand up to chemical wear. Tile and fiberglass offer the longest life, though they cost more up front.
We recommend you consider texture, color, and maintenance. For most Haymarket pools, a pebble or quartz aggregate offers a good balance of durability and style.
Always use a licensed contractor—Dolphin Pool Services—for proper bonding, curing, and warranty protection.
Material choice sets the basic lifespan, but installation quality and your water chemistry matter just as much. Hard water, high chlorine, and poor pH control can cause etching and scaling faster than normal wear.
We prep the surface, use bonding agents, and let the finish cure properly to prevent issues like delamination or cracking.
Simple maintenance—like brushing, keeping calcium balanced, and watching alkalinity—slows down wear. Our region’s freeze-thaw cycles can cause hairline cracks if the finish is too porous.
We inspect your pool and suggest materials that fit your use and local conditions. When you choose Dolphin Pool Services, you lower your long-term repair costs.
Start with a careful pool opening: wait for the recommended cure time, refill slowly, and add chemicals gradually. We follow manufacturer guidelines for each material.
Test pH, alkalinity, and calcium hardness twice a week for the first month, then weekly after things settle. Keep pH between 7.2–7.8 and alkalinity at 80–120 ppm. Make sure calcium hardness matches your finish to avoid problems.
Brush walls and steps weekly, vacuum as needed, and run filtration daily until water clears. Use gentle, material-safe cleaners—never harsh acids or strong chemicals on pebble or plaster.
Schedule annual inspections with us. We handle pool opening, maintenance, and repairs in Haymarket, and we’ll set up a care plan that protects your new surface and keeps your pool investment safe.
We get a lot of questions about timelines, materials, and when it’s time to replaster. We always recommend reaching out to us at Dolphin Pool Services for an accurate estimate and safe, professional work.
For a typical residential pool, resurfacing costs can vary based on material and size.
Plaster replastering usually falls within a moderate range for an average backyard pool. Tile, aggregate finishes, or large custom jobs may cost more. We provide written estimates after an on-site inspection.
Most standard resurfacing jobs take 2 to 7 days for the main work.
Draining, repairs, curing, and balancing chemicals can add a few more days before you can swim again. We’ll keep you updated at every step.
You can choose plaster, aggregate (pebble) finishes, vinyl liners, fiberglass gelcoat, tile, or even paint for a temporary fix.
Plaster and pebble finishes are the most common in this area. Fiberglass recoats work for fiberglass shells. We’ll help you pick what’s best for your pool.
Concrete or plaster pools usually need resurfacing every 8–15 years, depending on wear and water chemistry.
Fiberglass may only need a gelcoat touch-up every 10–20 years. Regular inspections and good care can stretch that interval. We check your pool’s condition and recommend the right timing.
Some resurfacing is possible in mild winter weather, but cold temperatures and freezing nights can cause curing problems.
We prefer to schedule work when temperatures stay above the limits for proper results. If you need urgent repairs, we offer temporary fixes and plan the permanent work when the weather improves.
You might notice cracks, peeling, bubbling, or spots where the texture and aggregate seem to be missing.
If your pool loses water more often than usual or the surface feels rough and uncomfortable, that’s a red flag.
Sometimes, you’ll find yourself adding more chemicals than before just to keep things balanced.
When these issues pop up, reach out to us at Dolphin Pool Services. We’ll come by, inspect your pool, and talk through the best way to get it looking and feeling great again.
