If your pool surface in Waldorf is stained, rough, or just refuses to shake off stubborn algae, it might be time to think about resurfacing or replastering. Resurfacing gives your pool a fresh look and makes it tougher, so you can swim without worrying about scrapes or leaks.
This process takes off the old, damaged surface and puts down a new, smooth layer. That new layer keeps water where it belongs and helps stop annoying cuts or abrasions.
Picking the right team for the job really matters. We at Dolphin Pool Services have the know-how to get it done right—our results last, even when the weather in Waldorf doesn’t want to cooperate.
When you trust experienced pros like us, your pool stays in better shape and you spend less time worrying about repairs.
With proper resurfacing and a little TLC, your pool can look great and work well for many years. We’re here to help you make the most of your pool investment.
Over time, pool surfaces get worn out. You’ll notice cracks, stains, or rough patches.
Dealing with these problems the right way keeps your pool’s structure safe and looking good. The materials and methods you choose matter a lot, especially around Maryland, Virginia, and DC, where weather can be unpredictable and tough on pools.
Pool durability depends on smart choices about materials and timing.
Resurfacing means we apply a new layer right over the old pool surface. We don’t remove the old material. This works well for minor to moderate damage and can use fiberglass, vinyl liners, or epoxy.
Replastering is a bigger job. We strip off all the old plaster and put on a fresh layer, usually for concrete pools. This fixes deeper problems like big cracks or heavy wear.
| Aspect | Resurfacing | Replastering |
|---|---|---|
| Surface Removal | No | Yes |
| Materials Used | Fiberglass, vinyl, epoxy | Plaster, aggregate, quartz |
| Cost | Generally lower | Higher due to more labor |
| Pool Types | Any | Concrete/plaster pools |
| Lifespan | 5-15 years (varies) | 7-12 years |
The right choice depends on your pool’s condition and budget. We always recommend a professional evaluation—something we’re happy to help with at Dolphin Pool Services.
First, we check out the pool for wear, stains, or cracks. We drain it and give it a thorough cleaning.
Next, we apply the new surface over the old one. For fiberglass and epoxy, we layer and cure the material carefully. Vinyl liners need to be fitted just right.
Most resurfacing jobs take three to seven days. Sometimes it’s longer if the weather won’t cooperate—humidity around Maryland and DC can slow things down.
After the surface cures, we refill the pool and balance the water chemistry. It’s important to get that right to protect the new layer.
We always use quality materials and proper technique, so you don’t have to worry about repairs popping up too soon.
We start replastering by draining the pool and removing the old plaster. That exposes the concrete underneath.
Next, we fix any cracks or damaged spots in the concrete. Pressure washing and acid washing get rid of dust and debris.
We mix the new plaster—usually cement with marble dust, sometimes with pigments or aggregates—and apply it in thin, even coats. This part takes a steady hand to avoid rough spots.
Curing takes about one to two weeks. We keep the pool moist so the plaster doesn’t crack.
Then we refill the pool slowly and monitor the water chemistry closely for a month. It’s a process best left to experienced folks like us, especially in the ever-changing weather of Virginia and Maryland.
Your budget, pool type, and desire for easy maintenance all matter here.
Traditional plaster is affordable and feels smooth, but it stains easily and usually lasts 7–10 years.
Pebble and quartz finishes last longer—12 to 20 years—and look more natural, but they cost more and need a bit more care.
Fiberglass coatings top the charts for durability, often lasting over 20 years, and they’re the lowest maintenance, though the upfront cost is higher.
| Material | Lifespan | Cost Level | Maintenance Level |
|---|---|---|---|
| Traditional Plaster | 7-10 years | Low | High |
| Pebble Quartz Finish | 12-20 years | Medium-High | Medium |
| Fiberglass | 20+ years | High | Low |
The sun, temperature swings, and local water in Maryland, Virginia, and DC all play a role in how well your pool surface holds up. We at Dolphin Pool Services help you pick materials that work for your pool and your climate.
If you want your resurfaced pool to last, you need regular care and the right support. We focus on simple steps and reliable service, so your pool stays beautiful and trouble-free.
Brushing the pool surface daily keeps dust and algae from taking hold. We suggest brushing at least once a day, especially right after resurfacing.
Regular vacuuming removes debris and helps keep the finish scratch-free.
We check and balance water chemistry often—keeping pH, alkalinity, and calcium hardness in the sweet spot. If those get out of whack, stains or damage can show up fast.
Don’t shock the pool with chlorine too soon or in heavy doses. That can mess up the new surface.
Running the pool filter nonstop for the first 72 hours after refilling is key. After that, keeping the filter clean keeps water clear and helps the surface last.
Our team at Dolphin Pool Services does more than basic maintenance. We use pro-level equipment and know-how to protect your new pool surface.
We test chemical levels precisely and spot early warning signs before they become big problems.
We also provide regular inspections—looking for cracks, discoloration, or other issues. Our advice on deep cleanings and chemical tweaks is tailored to your pool.
Sticking with a reputable company like ours gives you peace of mind. We’re here to help with care tips and quick fixes, so your investment stays safe.
Pools in this region face unique headaches—cold winters, hot summers, and tricky water quality. We adjust maintenance routines to handle freeze-thaw cycles and blazing heat.
Water hardness and minerals can vary a lot, which affects plaster finishes. Our local experience helps us recommend the right balance to avoid scaling or etching.
We also keep up with local rules for pool chemicals and disposal. That protects your pool, your family, and the environment.
If you’ve got questions about cost, timing, or the benefits of resurfacing and replastering, you’re not alone. Here are some answers to help you make the right call for your pool.
We look at the pool’s size, the type of surface, and how worn out the current finish is. Repairs and material choices also play a role.
The size of your pool, what plaster you pick, and how much damage we need to fix all affect the price. Labor and local rates matter too.
We usually recommend resurfacing every 10 to 15 years. Heavy use, poor upkeep, or tough weather might mean you need it sooner.
Look for cracks, rough or worn spots, stains, or water leaks. These issues can hurt safety and water quality, so don’t wait too long to address them.
Resurfacing brings back your pool’s durability, sharpens its look, and makes it safer. It’s usually more cost-effective than replacing the whole thing, and it can fix circulation or drainage headaches too.
Most resurfacing jobs wrap up in just a few days, but sometimes it can stretch to two weeks.
It really comes down to your pool’s size, any existing damage, and—of course—the weather.
Honestly, we at Dolphin Pool Services think it’s worth choosing a professional crew like ours. You’ll get reliable results and peace of mind, and that’s not something you want to gamble with when it comes to your inground pool.
